The most obvious feature of sedimentary rock is its layering. This feature is produced by changes in deposition over time. With this in mind geologist have long known that the deeper a sedimentary rock layer is the older it is, but how old? Although there might be some mineral differences due to the difference in source rock, most sedimentary rock deposited year after year look very similar to one another. This means that a quartz sandstone deposited million years ago will look very similar to a quartz sandstone deposited 50 years ago. Making this processes even more difficult is the fact that due to plate tectonics some rock layers have been uplifted into mountains and eroded while others have subsided to form basins and be buried by younger sediments. With out individual time stamps the process of dating these structures could become extremely difficult.
Although there might be some mineral differences due to the difference in source rock, most sedimentary rock deposited year after year look very similar to one another.
This means that a quartz sandstone deposited million years ago will look very similar to a quartz sandstone deposited 50 years ago. Making this processes even more difficult is the fact that due to plate tectonics some rock layers have been uplifted into mountains and eroded while others have subsided to form basins and be buried by younger sediments. With out individual time stamps the process of dating these structures could become extremely difficult.
To deal with many of these problems geologists utilize two types of geologic time: Relative time places events or formations in order based on their position within the rock record relative to one another using six principles of relative dating. Relative time can not determine the actual year a material was deposited or how long deposition lasted; it simply tell us which events came first. This process lead to a system of time containing eons, eras, periods, and epochs all determined by their position in the rock record.
For example, rocks of the Phanerozoic eon are found on top of rocks from the Proterozoic eons therefore rocks of the Phanerozoic are younger than rocks of the Proterozoic. Unlike relative time, absolute time assigns specific ages to events or formations and is typically recorded in years before present.
Relative dating is the science of determining the relative order of past events i. In geology, rock or superficial deposits , fossils and lithologies can be used to correlate one stratigraphic column with another. Prior to the discovery of radiometric dating in the early 20th century, which provided a means of absolute dating , archaeologists and geologists used relative dating to determine ages of materials.
Though relative dating can only determine the sequential order in which a series of events occurred, not when they occurred, it remains a useful technique. Relative dating by biostratigraphy is the preferred method in paleontology and is, in some respects, more accurate. The regular order of the occurrence of fossils in rock layers was discovered around by William Smith.
While digging the Somerset Coal Canal in southwest England, he found that fossils were always in the same order in the rock layers. As he continued his job as a surveyor , he found the same patterns across England. He also found that certain animals were in only certain layers and that they were in the same layers all across England. Due to that discovery, Smith was able to recognize the order that the rocks were formed. Sixteen years after his discovery, he published a geological map of England showing the rocks of different geologic time eras.
Methods for relative dating were developed when geology first emerged as a natural science in the 18th century. Geologists still use the following principles today as a means to provide information about geologic history and the timing of geologic events. The principle of Uniformitarianism states that the geologic processes observed in operation that modify the Earth's crust at present have worked in much the same way over geologic time.
The principle of intrusive relationships concerns crosscutting intrusions. In geology, when an igneous intrusion cuts across a formation of sedimentary rock , it can be determined that the igneous intrusion is younger than the sedimentary rock. There are a number of different types of intrusions, including stocks, laccoliths , batholiths , sills and dikes. The principle of cross-cutting relationships pertains to the formation of faults and the age of the sequences through which they cut.
Faults are younger than the rocks they cut; accordingly, if a fault is found that penetrates some formations but not those on top of it, then the formations that were cut are older than the fault, and the ones that are not cut must be younger than the fault.
Finding the key bed in these situations may help determine whether the fault is a normal fault or a thrust fault. The principle of inclusions and components explains that, with sedimentary rocks, if inclusions or clasts are found in a formation, then the inclusions must be older than the formation that contains them.
For example, in sedimentary rocks, it is common for gravel from an older formation to be ripped up and included in a newer layer. A similar situation with igneous rocks occurs when xenoliths are found. These foreign bodies are picked up as magma or lava flows, and are incorporated, later to cool in the matrix. As a result, xenoliths are older than the rock which contains them.
Apply the principles of relative age dating
The principle of original horizontality states that the deposition of sediments occurs as essentially horizontal beds. Observation of modern marine and non-marine sediments in a wide variety of environments supports this generalization although cross-bedding is inclined, the overall orientation of cross-bedded units is horizontal. The law of superposition states that a sedimentary rock layer in a tectonically undisturbed sequence is younger than the one beneath it and older than the one above it.Relative Age Dating I
This is because it is not possible for a younger layer to slip beneath a layer previously deposited. This principle allows sedimentary layers to be viewed as a form of vertical time line, a partial or complete record of the time elapsed from deposition of the lowest layer to deposition of the highest bed.
The principle of faunal succession is based on the appearance of fossils in sedimentary rocks. As organisms exist at the same time period throughout the world, their presence or sometimes absence may be used to provide a relative age of the formations in which they are found.
Based on principles laid out by William Smith almost a hundred years before the publication of Charles Darwin 's theory of evolution , the principles of succession were developed independently of evolutionary thought.
The principle becomes quite complex, however, given the uncertainties of fossilization, the localization of fossil types due to lateral changes in habitat facies change in sedimentary strata , and that not all fossils may be found globally at the same time.
The principle of lateral continuity states that layers of sediment initially extend laterally in all directions; in other words, they are laterally continuous. As a result, rocks that are otherwise similar, but are now separated by a valley or other erosional feature, can be assumed to be originally continuous. Layers of sediment do not extend indefinitely; rather, the limits can be recognized and are controlled by the amount and type of sediment available and the size and shape of the sedimentary basin.
Sediment will continue to be transported to an area and it will eventually be deposited. However, the layer of that material will become thinner as the amount of material lessens away from the source.
Often, coarser-grained material can no longer be transported to an area because the transporting medium has insufficient energy to carry it to that location. In its place, the particles that settle from the transporting medium will be finer-grained, and there will be a lateral transition from coarser- to finer-grained material.
The lateral variation in sediment within a stratum is known as sedimentary facies. If sufficient sedimentary material is available, it will be deposited up to the limits of the sedimentary basin. Often, the sedimentary basin is within rocks that are very different from the sediments that are being deposited, in which the lateral limits of the sedimentary layer will be marked by an abrupt change in rock type. Melt inclusions are small parcels or "blobs" of molten rock that are trapped within crystals that grow in the magmas that form igneous rocks.
In many respects they are analogous to fluid inclusions.